LYQ-30 cutting machine

Type：

Round steel cutting machine

View：

6829

Contact：

Contact

Product Introduction

1、Using automatic feeder,Automatically clamp material to the center,Without artificial feeding material,one multiple machine,reducing lab or force

2、Using closed mould,replacing the mould is very convenient ,the mould can be used repeatedly through rotate it,for long service life.

3、The drive gears adopt high quality alloy steel,after heat treatment and lapping finish

4、Professional bimetal sliding guide rail,good resistance to wear and durability

5、Adopted with center automatic lubrication system for guideway to have the good performance for little resistance,little friction,good lubrication and long life etc.oil cut-off automatic alarm

6、Keep-off mechanism design is reasonable,makes the size of blanking exact，small tolerance

7、Using the enclosed gear box, gear gumming lubrication

LYQ-30 main technical parameters
Model	LYQ-30
The max diameter of cutting	28
The fastest speed of cutting(s/min)	65
The scope of gauge(mm)	20-350
Main motor power	3KW
Yes or No the clutch	yes
The size of equipment	3608201380
The motor of automatic feeding frame	0.75KW
The feeding speed	300mm/s
The discharging mouth from the ground level	868mm
The size of feeding frame(mm)	600018001000
Weight(kg)	2000

LYQ-30 Material allocation table
Meterial	The max diameter of cutting	remark
Meterial	Round steel	remark
20# Q235	φ36	If the material is cold rolled condition, the max diameter of shearing reduces by twenty percent
20MN 20Cr	φ34
45# 1Cr13 40MN	φ32
55# 40Cr 20CrMnTi 2Cr13	φ22
35CrMo 3Cr13	φ20
42CrMo GCr15 60Cr2Mn	φ16

LYQ-30 cutting machine

Video display

Contact Way：

Give us message：

LYQ-30 cutting machine

Video display

LYQ-40 cutting machine

LYQ-50 cutting machine

LYQ-65 cutting machine

LYQ-80 cutting machine

Contact Way：

Give us message：